Amps
[Top] [All Lists]

Re: [Amps] Using computer CPU coolers on GI46b triode ?

To: "Fuqua, Bill L" <wlfuqu00@uky.edu>, "Joe Subich, W4TV" <lists@subich.com>, <amps@contesting.com>
Subject: Re: [Amps] Using computer CPU coolers on GI46b triode ?
From: "Carl" <km1h@jeremy.mv.com>
Date: Fri, 9 May 2014 18:29:07 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Ive been using modified 8072's in a couple of NCL-2000's for a couple of decades; runn fine at 1200W or so CW/SSB. At $5-10 ea for NIB I cleaned out several 2 way radio shops when they scrapped all the tube gear or went out of business/estate sales.

Carl
KM1H


Subject: Re: [Amps] Using computer CPU coolers on GI46b triode ?


I once made a heat sink for 4 6AG7 tubes by drilling out a large block of aluminum boring holes in it aprox. 1 in dia and using a tungsten tipped saw blade cut slots for fins. Worked well. Somewhere I have some heat sinks for some 8072's ( 8122 without fins) used in a 500 watt plasma generators. Some were made of sheet metal, and others were machined blocks, both were forced air cooled, neither worked very well. The manufacturer had to can the product. They were not reliable. At that time 8072's were much cheaper than 8122s. I would not recommend use of heat pipes like those used in many computers. A computer has
to dissipate much less heat than a power tube.

73
Bill wa4lav

_______________________________________
From: Amps [amps-bounces@contesting.com] on behalf of Joe Subich, W4TV [lists@subich.com]
Sent: Friday, May 09, 2014 2:17 PM
To: amps@contesting.com
Subject: Re: [Amps] Using computer CPU coolers on GI46b triode ?

On 5/9/2014 11:12 AM, Carl wrote:
Subject: Re: [Amps] Using computer CPU coolers on GI46b triode ?

I can easily see boring a CPU sink as a simpler alternative as long as a
round silicone rubber chimney isnt required.

That may be possible with an old "block with fins" type heat sink but
many of the newer ones use a relatively thin plate/heat spreader and
tubes filled with a heat transfer fluid.  The tubes bend upward to a
radiator in the normal air flow or with or have a fan mounted to the
radiator.  Drilling/boring one of those would damage the heat tubes
and render it useless.

73,

   ... Joe, W4TV
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>