ORIGINAL MESSAGE: (may be snipped)
On 5/3/2014 3:16 PM, glenn riccio wrote:
Hi every one , I am contemplating building another QRO amp. Several years
ago , I built a GG amp using a pair of 3-500z"s. Very conventional but it
works very well. I now have the urge to build another amp. I am considering
using a 4-1000 but I have read that it probably isn't the best choice for GG
service. Then I thought about class AB1. That also has its drawbacks as I
understand neutralization can be tough to get right. Since 99% of my
operating is CW, maybe a class C is the way to go.
Does any one have any suggestions as to the best tube to use other than
4-1000 ? Any ideas would be helpful. Thanks es 73 de K7GFR Glenn
_______________________________________________
REPLY:
You're sure to get a lot of feedback on this.
Having built five 1500 watt amps from scratch with varying degrees of
success, here are my suggestions:
1/ Use class AB1. Properly designed with short connections as much as
possible, GG amps don't need neutralization when using triodes.
2. Best tube, IMO, for legal limit is the 8877. More expensive than some
tubes, but the Chinese ones on eBay do fine for about $500. Mine has
been in my amp for going on five years with no trouble, still full output.
3. Don't skim on the bandswitch or the tune and load capacitors. A good
bandswitch costs between $300 and $400 if bought brand new, and the best
caps are vacuum variables, which I buy used from Max Gain Systems. Turns
counters from Palstar.
If there are any other questions, feel free to ask.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|