Bill, et al,
Hy-Gain currently makes the BN-4000. It is rated at 4KW and HRO sells it for
$109.95. I have no experience with it so Caveat Emptor.
Semper Fi,
Tommy - K6YE
DX IS and CW RULES
----- Original Message -----
From: Bill Turner <dezrat1242@wildblue.net>
To: amps@contesting.com
Sent: Mon, 17 Mar 2014 17:40:36 -0400 (EDT)
Subject: Re: [Amps] Triband balun
ORIGINAL MESSAGE: (may be snipped)
On 3/17/2014 3:09 PM, Gary Smith wrote:
> Rehabbing my father's old TH3-Mk3 tribander from the 80's. The balun
> he had on it was a 1:1 bal/unbal BN-86. As I'll be using an amp with
> it, something more robust is probably a good idea. I was thinking 10
> loops of coax at the antenna would do the job.
>
> Any suggestions for a better alternative that will hold up in a RTTY
> contest?
>
> Thanks,
>
> Gary
> KA1J
REPLY:
I had the same problem many years ago. Hy-Gain made a replacement balun
called the something-2000, which did the job. I don't know if Hy-Gain is
even around anymore, but if you can find one, that will fix it.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|