| To: | amps@contesting.com |
|---|---|
| Subject: | [Amps] ALPHA 76PA problem |
| From: | DGB <ns9i2016@bayland.net> |
| Date: | Fri, 14 Mar 2014 17:46:20 -0500 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
I'm having a problem that once I key/unkey the amp, rcv don't come back.
If I push the cw/ssb/or Out=Stby, rcv comes back. Happens on all
bands/modes. It worked okay before vacation but after two months sitting
idle in a cold shack this started occurring.
What is most likely causing this? First thought was a dirty relay but this amp has had the Byrd mods done to it long time ago so the open relay no longer exists. TIA 73 Dwight NS9I _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] Command Technologies VHF 1200 Six Meter Amp F/s, Robert Arenella |
|---|---|
| Next by Date: | Re: [Amps] ALPHA 76PA problem, DGB |
| Previous by Thread: | Re: [Amps] Command Technologies VHF 1200 Six Meter Amp F/s, Robert Arenella |
| Next by Thread: | Re: [Amps] ALPHA 76PA problem, DGB |
| Indexes: | [Date] [Thread] [Top] [All Lists] |