I have original function switches for sale. I also have a prototype of the new
Harbach rectifier board. Its been updated with the big diodes and 3 good
metering resistors
Sent from AOL Mobile Mail
-----Original Message-----
From: Carl <km1h@jeremy.mv.com>
To: Pete Smith N4ZR <n4zr@contesting.com>; Amps <Amps@contesting.com>
Sent: Fri, Mar 7, 2014 09:56 AM
Subject: Re: [Amps] Harbach metering board in SB-220
<div id="AOLMsgPart_1_671d4e94-ffb9-4986-a207-23ce62cb6fa9" style="margin:
0px;font-family: Tahoma, Verdana, Arial, Sans-Serif;font-size: 12px;color:
#000;background-color: #fff;">
<pre style="font-size: 9pt;"><tt>Ive had many of those boards fail due to the
1/4 W metering resistors used.
Last I heard Jeff was going to come out with an update using real HV
resistors.
The tiny 1N4007's used in the bias are also failure items and I replace with
1N5408's along with the resistors before installing. Those were also to be
updated for the new board.
The switch can be replaced with any of several of the import single pole 3
positions or more. If the detent in degrees is the same the knob will line
up and just dont use the other positions. If there is a position tab bend
one to stop at 3.
Carl
KM1H
----- Original Message -----
From: "Pete Smith N4ZR" <<a
href="mailto:n4zr@contesting.com";>n4zr@contesting.com</a>>
To: <<a href="mailto:Amps@contesting.com";>Amps@contesting.com</a>>
Sent: Friday, March 07, 2014 7:14 AM
Subject: [Amps] Harbach metering board in SB-220
>I am trying to understand a minor problem in my SB-220, which otherwise
>works fine. I originally installed the Harbach board because the HV was
>reading low. It fixed that, but quite quickly thereafter the HV metering
>failed. I *think* the relative power metering failed at the same time, but
>can't remember for certain - a common cause is puzzling because I can't see
>any commonality between the two circuits.
>
> Can anyone help me identify components that are likely responsible?
>
> --
> 73, Pete N4ZR
> Check out the Reverse Beacon Network at
> <a href="http://reversebeacon.net,";
> target="_blank">http://reversebeacon.net,</a>
> blog at reversebeacon.blogspot.com.
> For spots, please go to your favorite
> ARC V6 or VE7CC DX cluster node.
>
> _______________________________________________
> Amps mailing list
> <a href="mailto:Amps@contesting.com";>Amps@contesting.com</a>
> <a href="http://lists.contesting.com/mailman/listinfo/amps";
> target="_blank">http://lists.contesting.com/mailman/listinfo/amps</a>
>
>
> -----
> No virus found in this message.
> Checked by AVG - <a href="http://www.avg.com"; target="_blank">www.avg.com</a>
> Version: 2014.0.4335 / Virus Database: 3722/7161 - Release Date: 03/06/14
>
_______________________________________________
Amps mailing list
<a href="mailto:Amps@contesting.com";>Amps@contesting.com</a>
<a href="http://lists.contesting.com/mailman/listinfo/amps";
target="_blank">http://lists.contesting.com/mailman/listinfo/amps</a>
</tt></pre>
</div> <!-- end of AOLMsgPart_1_671d4e94-ffb9-4986-a207-23ce62cb6fa9 -->
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|