It could be epoxy and if so, prolonged insertion in boiling water may work. No
guarantee.
Do NOT use the XYL's best saucepans - trouble is definitely guaranteed if you
do! Even if it does work, the saucepan may well not be fit for culinary use
afterwards.
73
Peter G3RZP
========================================
Message Received: Dec 01 2013, 03:57 PM
From: "Larry" <larry@w7iuv.com>
To: "AMPS" <amps@contesting.com>
Cc:
Subject: [Amps] E-core transformer
Some time back, some one on this list had a suggestion for
dis-assembling the E-core ferrite transformers typically found in
switching power supplies. I've had good results using them in low band
SSPA's and would like to use more in my latest project.
I have a quantity of salvaged transformers that I want to re-use but am
having a lot of trouble taking them apart so that I can rewind. I've
tried heating with a heat gun, but the ferrite falls apart before the
varnish gets soft. Any suggestions?
Larry - W7IUV
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|