Even CBers can build stable grid driven 4X5's! It is a very hard tube to
make oscillate.
The SK300A socket requires good screen bypassing for RF.
Carl
KM1H
----- Original Message -----
From: "peter chadwick" <g8on@fsmail.net>
To: "Markku Oksanen" <ww1c@outlook.com>; "Amps" <amps@contesting.com>
Sent: Friday, November 15, 2013 5:44 AM
Subject: Re: [Amps] Passive grid stability calculation for a tetrode?
Markku,
It may be shown that (i.e. as the books say, it is left as an exercise for
the reader!) if you have H<2 as a result of solving the equation
H=gwCpgRpRg where g is the mutual conductance, w = 2 times pi times
frequency, Cpg is the pate - grid capacitance, Rp is the plate load
resistance and Rg is the grid resistance, the stage is stable. Arguably Rp
should be the plate load resistance in parallel with AC plate resistance
of the tube, but sticking to the load resistance gives a bit more
stability.
vy 73
Peter G3RZP
========================================
Message Received: Nov 15 2013, 07:32 AM
From: "Markku Oksanen" <ww1c@outlook.com>
To: "Amps" <amps@contesting.com>
Cc:
Subject: [Amps] Passive grid stability calculation for a tetrode?
All
I am back on my 4CX5000 project and as it not done yet, I am still
contemplating the circuit to be used.Earlier this year I got solid info
from this reflector for GG operation and that look like a pretty good
solution.However, I was wondering about passive grid, grid driven also.
The question is: How do a calculate the stability? If I simply do math
for tube voltage gain I get something like 25.Then if I calculate the
feedback capacitive voltage divider, Grid to Cathode 120 pf, Plate to Grid
0.7 pf, I get less than 0.01 for the ratio. If the beast needs the voltage
gain times feedback gain to be above 1 to oscillate, to me it seems this
tube is stable no matter what. Where did I err if I did?
Thanks!
MarkkuWW1C
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3222/6338 - Release Date: 11/15/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|