[Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..

[KA4INM <ka4inm@gmail.com>]

  Hi  Bill WB6RFW:

 <<
Now that I'm in the middle of doing a QSK mod to the Henry 2KD-4 ... I'm 
looking at the BNC input connector to the amp. It occurs to me that if I 
use my FT-2000D barefoot through the amp I may be pushing the BNC pretty 
hard at 200W. I can't think of a time I've ever put that much power 
through a BNC. There's also that piece of RG-58U in there. I guess I've 
put 200W pulse from a transponder through one but it's pretty low duty 
cycle.
Maybe I shouldn't worry so much ...
 >>
--
  Ron  KA4INM - Youvan's corollary:
                Every action results in unwanted side effects.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps