Hi
Mine shows at the toroid RF out SO-239, 1x 1.2 uH connected to 2x 10pF/1kv
capacitor in series with this 1.2uF.
Rejean
VA2AM
-----Message d'origine-----
De : Amps [mailto:amps-bounces@contesting.com] De la part de Jim W7RY
Envoyé : November 9, 2013 12:24 AM
À : amps@contesting.com
Objet : [Amps] Autek WM-1 Schematic or Help
I have a problem with an Autek WM1 measring the output of my amplifier. :)
Does anyone have a schematic for the Autek WM-1? A Google search found
nothing.
Mine looks like it has a wireing error. The center tap of the sens
transformer is not hooked to anything.. Also there is a small choke on the
output connector, then that goes to 2ea 10 PF caps in series, then to the
board. The small choke is smoked/burned.
Any idea what the value of the choke is? Anyone have a picture of the
internal of the sensor module?
Thanks
73
Jim W7RY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|