Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] Workshop Danger

from [peter chadwick] [Permanent Link][Original]
To: amps@contesting.com
Subject: Re: [Amps] Workshop Danger
From: peter chadwick <g8on@fsmail.net>
Reply-to: g8on@fsmail.net
Date: Fri, 13 Sep 2013 17:52:20 +0200
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
Realistically, fly cutters are no more and no less dangerous than an end mill 
or slot drill. Tools and especially machine tools need to be treated with care 
and respect...like amplifiers. There's no room in either case for idiots if 
things are to go right.

73

Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] Future of RF AMPS, Joe Subich, W4TV
Next by Date:  [Amps] Rectifier equilization?, Hardy Landskov
Previous by Thread:  Re: [Amps] Workshop Danger, N1BUG
Next by Thread:  Re: [Amps] Workshop Danger, Manfred Mornhinweg
Indexes:  [Date] [Thread] [Top] [All Lists]