[Amps] Advice needed for SS amp

["Jim Thomson" <jim.thom@telus.net>]

Date: Thu, 06 Jun 2013 08:24:58 -0600
From: Larry Benko <xxw0qe@comcast.net>
To: amps@contesting.com
Subject: Re: [Amps] Advice needed for SS amp

2000W of power(heat) into 1 gallon of pure water raises the temperature 
7.7deg. C (13.7deg. F) per minute.  Anything you do to water such as 
mixing in alcohol reduces the cooling capacity somewhat.  In a total 
loss system where the water would be run through the amp and then out 
into the garden a flow of 1 quart (or ~ 1 liter) per minute would suffice.

Larry, W0QE

##  are you sure about that ?   IF the cold tapwater was 50 F, it would take 
11.8 mins to reach
boiling.   It does not take more than 5 mins to boil  1/2 gallon of water in my 
1500 w kettle. 

Jim   VE7RF

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps