IMHO the graphite anode version puts out & maintains WAY MORE heat
than the good old moly style. Just noticed recently RF Parts has a
mention
about that too.
Dave N3DB
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Carl
Sent: Tuesday, May 28, 2013 10:43 AM
To: 'Amps reflector'; Paul Baldock
Subject: Re: [Amps] Different 3-500Z amplifiers
Metal anodes were produced by Eimac and China.
Graphite anodes were/are produced by Eimac, Amperex, Philps, and China.
Carl
KM1H
----- Original Message -----
From: "Paul Baldock" <paul@paulbaldock.com>
To: "'Amps reflector'" <amps@contesting.com>
Sent: Monday, May 27, 2013 10:05 PM
Subject: [Amps] Different 3-500Z amplifiers
I have 2 amps with 3-500Zs. The 3-500Z's have Eimac labeling. The
anode of these has vertical fins.
I just acquired another amp with 3-500Zs. These tubes have no
lebeling and have an anode with a horizontal disks.
Could somebody educate me on the operational difference if any of
these 2 very different looking 3-500Z's?
Thanks
- Paul
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3184/5863 - Release Date: 05/28/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3184/5863 - Release Date: 05/28/13