Hi Iain,
Please, check this piece of software called GGridPA
It is very useful.
73, Maximo - M0HAO
> From: iain@g4dpf.co.uk
> To: davidhcraig@verizon.net; Amps@contesting.com
> Date: Thu, 9 May 2013 14:40:56 +0100
> Subject: Re: [Amps] GS-35B Pi Tank design
>
> Hi Dave
>
> Many thanks for the link.
>
> Very useful
>
> Thanks and 73's Iain
>
> -----Original Message-----
> From: David Craig [mailto:davidhcraig@verizon.net]
> Sent: 05 May 2013 06:55
> To: 'Iain'; Amps@contesting.com
> Subject: RE: [Amps] GS-35B Pi Tank design
>
> GM Iain,
>
> I've included a link here http://www.nd2x.net/gs35-HF.html but
> seems to me easiest to just calculate the plate load impedance given your
> planned B+ value and tap accordingly per band. Whether its variable or
> fixed on the schematic really doesn't matter if you plan ahead. GL
>
> 73 Dave N3DB
>
>
>
>
>
> -----Original Message-----
> From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Iain
> Sent: Sunday, May 05, 2013 1:13 AM
> To: Amps@contesting.com
> Subject: [Amps] GS-35B Pi Tank design
>
> Hi
>
> Wonder if the group can point me in the right direction ?
>
>
>
> I am building a GS-35B Amplifier for the HF bands and wanted to use a Fixed
> (tapped) coil in the pi-tank rather than a roller inductor.
>
> Does anyone know of a published (on the web) design of a GS-35B amp for HF
> with a fixed tapped coil in the output ?
>
>
>
> Thanks in anticipation
>
> Iain G4DPF
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.3272 / Virus Database: 3162/6308 - Release Date: 05/08/13
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|