Quoting Ian White <gm3sek@ifwtech.co.uk>:
If the tube draws more amps ... a short or a bad load... maybe a two
amp spike... that is 120 watts which will hopefully burn out the resistor
( acting like a fuse ) before the transformer or diode stack goes
up in >>smoke.
Sorry, NOT correct - two times over.
Ian,
Sorry, NOT correct - recheck your math. Four times over. Resistor go POOF.
Don W4DNR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|