To: | amps@contesting.com |
---|---|
Subject: | [Amps] Input matching on Emtron DX3 |
From: | Jim Moci <jimmoci@aol.com> |
Date: | Sun, 4 Nov 2012 14:36:57 -0500 (EST) |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
I have an early Emtron DX3 and the input SWR is a little high on many
of the bands. Was never an issue with my older TS-940 but seems to be
an issue with my much newer FT1000MP MK-V reducing power with the high
VSWR. Is there any adjustable input matching on this amp? Are they
running resistors to ground on the input for matching or something
else? Thanks for any advice.
73, Jim _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] plate voltage meter shunt, Bill Turner |
---|---|
Next by Date: | Re: [Amps] Drake L4B and L7 QSK Board, Jim W7RY |
Previous by Thread: | Re: [Amps] The transformer rosetta stone (Gary Smith), Manfred Mornhinweg |
Next by Thread: | [Amps] Emtron DX-3 inout matching, Jim Moci |
Indexes: | [Date] [Thread] [Top] [All Lists] |