How thick are the walls on the cans?
Most ordinary cans will crush with a vacuum inside.
That is a differential pressure of 15 PSI.
73
Bill wa4lav
At 07:49 PM 10/4/2012 -0400, Roger (K8RI) wrote:
On 10/4/2012 4:16 AM, ian@ifwtech.co.uk wrote:
If a tube has leakage to air, it is doomed anyhow, and storing it in a
vacuum can only delay the inevitable. Leakage will start right in
again when the tube is put into service.
True, but:
The military used to get 4CX150s in vacuum packed cans.
Lets say a tube with metal to glass seals like the 4CX150, or PL172 has an
expected vacuum life of 15 years. If you have a bunch of NOS (in the
cans) that are 30-40 years old when you open the can the tube is starting
its life in the real world with an expected life of 15 years, while one
that was never in a can is most likely gassy without ever having been
used. OTOH that gassy tube is highly unlikely to be at atmospheric
pressure inside, so if you place it in a hard vacuum the difference
between inside and out is not great and the tube is unlikely to ever
return to a high vacuum. At least not within a practical time.
IE the difference between 1 X 10^-5 and 1 X 10 ^-7 Toor or atmospheres is
miniscule compared to 15 psi (atmospheric pressure) and 1 X 10^-5 Toor.
Too bad we didn't vacuum pack all those spare PL172s when they were new.
They'd be worth a small fortune now.
73
Roger (K8RI)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|