To: | "Bill, W6WRT" <dezrat1242@yahoo.com>, AMPS <amps@contesting.com> |
---|---|
Subject: | Re: [Amps] Zener Screen Regulators |
From: | Bill Fuqua <wlfuqu00@uky.edu> |
Date: | Tue, 4 Sep 2012 00:00:40 -0400 |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
An interesting note about current flow.I am a professional engineer and we have to have Continuing Education Credits to renew license every two years. There a number of places that offer these courses for a price on line. Some use public domain materials and offer a little quiz afterwards and send you a certificate. Some use old navy training books. Naturally, those use electron current flow and all the engineering materials use conventional current flow (positive to negative). A bit confusing for a young engineer but not for an old timer who has had to deal with both. 73 Bill wa4lav At 07:37 PM 9/3/2012 -0700, Bill, W6WRT wrote: ORIGINAL MESSAGE: On Mon, 3 Sep 2012 11:15:20 -0600, you wrote: > >Bill, >I'm not sure what you mean by a zener diode "supplying negative current." A >zener diode doesn't supply any current at all, positive or negative. It >sinks current while maintaining a constant voltage. If, for example, 100mA >is supplied by the "feed resistor" and there is -20mA of negative screen >current, the the zener will sink 120 mA. If there is +20mA of positive >screen current, the zener will sink 80mA. If the screen current rises to >+100mA, then the zener will drop out of regulation and the screen voltage >will drop. That said, I agree that no separate bleeder is required with a >zener diode regulator. In effect, the zener acts as the bleeder. >73, >Jiim W8ZR REPLY: I think we agree on everything but semantics. I often get tangled up with the"current flows from positive to negative" boys over the terms source and sink.Benjamin Franklin got it wrong and the IEEE and others have been perpetuatingthe error ever since. I usually ask the positive to negative boys why a tube has to have a heated filament or cathode in order to "receive" current flow from theanode. Still waiting for an answer. 73, Bill W6WRT _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] (no subject), Bill, W6WRT |
---|---|
Next by Date: | Re: [Amps] Zener Screen Regulators, peter chadwick |
Previous by Thread: | Re: [Amps] Zener Screen Regulators, Bill, W6WRT |
Next by Thread: | Re: [Amps] Zener Screen Regulators, Bill, W6WRT |
Indexes: | [Date] [Thread] [Top] [All Lists] |