[Amps] Neon xfmr for HiPot

Amps

[Amps] Neon xfmr for HiPot

from [Mike]

To:	amps@contesting.com
Subject:	[Amps] Neon xfmr for HiPot
From:	Mike <k4gmh@arrl.net>
Date:	Sun, 15 Jul 2012 23:28:49 -0400
List-post:	<amps@contesting.com">mailto:amps@contesting.com>

Hello,

Can a 10 KV, 30 mA., xfmr used for a neon light be used in a hipot tester?
Seems like a natural with just a small variac used to vary the primary
voltage (120 VAC) for adjusting the output voltage.

  73,
  Mike, K4GMH
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] Neon xfmr for HiPot, Mike <= Re: [Amps] Neon xfmr for HiPot, Jim Barber Re: [Amps] Neon xfmr for HiPot, Randall, Randy Re: [Amps] Neon xfmr for HiPot, Ron Youvan Re: [Amps] Neon xfmr for HiPot, Bill, W6WRT Re: [Amps] Neon xfmr for HiPot, Larry Benko Re: [Amps] Neon xfmr for HiPot, Randall, Randy Re: [Amps] Neon xfmr for HiPot, Bill, W6WRT Re: [Amps] Neon xfmr for HiPot, Carl Re: [Amps] Neon xfmr for HiPot, Radio WC6W Re: [Amps] Neon xfmr for HiPot, k9muf

Previous by Date:	[Amps] 1.5 KW 8877 at 100 MHz, John Lyles
Next by Date:	Re: [Amps] Neon xfmr for HiPot, Jim Barber
Previous by Thread:	[Amps] 1.5 KW 8877 at 100 MHz, John Lyles
Next by Thread:	Re: [Amps] Neon xfmr for HiPot, Jim Barber
Indexes:	[Date] [Thread] [Top] [All Lists]