Anything Tek from the older 465/475 to newer model analog scopes and into
digital.
High end analog scopes are now bargains as they are being dumped. $50-100
can buy quite a lot. Just make sure it is functioning to spec before
purchasing; also check for a calibration sticker.
The higher the frequency the more expensive the probes altho our Chinese
"friends" are producing some very good ones.
Carl
KM1H
----- Original Message -----
From: "Melvin Nichols" <nz0o@iowatelecom.net>
To: "amps" <amps@contesting.com>
Sent: Tuesday, June 26, 2012 8:03 PM
Subject: [Amps] Oscilloscope Purchase
>A little off topic, but I want to check the timing of my amp relays. I have
>been looking at purchasing a used scope for this and general repair on my
>equipment. I have been looking at a 2-channel, 100-200Mhz type. What would
>be a good model for this purpose?
>
> Thanks, 73
> Mel, NZ0O
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2433/5095 - Release Date: 06/26/12
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|