Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] Need Parts for a HA-45 Amp

from [Gary H. Harmon, Jr.] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [Amps] Need Parts for a HA-45 Amp
From: "Gary H. Harmon, Jr." <gharmon@idworld.net>
Date: Sat, 23 Jun 2012 16:08:44 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
I need the following for a Hallicrafters HA-45 amp:

 

Chimney (3 inches high by 4 inches wide

Tube socket

Meter

 

Thanks for reading.

 

73,

 

Gary H. Harmon, Jr. - K5JWK

6003 Archwood

San Antonio, TX 78239-1504

210.657.1549h / 210.884.6926c

 

"Too many projects, not enough time".

 

 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] Need Parts for a HA-45 Amp, Gary H. Harmon, Jr. <=
Previous by Date:  Re: [Amps] Acoustic Noise Comparison, Jim Brown
Next by Date:  [Amps] Coax for MHV connectors?, Jim Barber
Previous by Thread:  [Amps] Collins 30S-1 4CX1500B tube, Joel Kornreich
Next by Thread:  [Amps] Coax for MHV connectors?, Jim Barber
Indexes:  [Date] [Thread] [Top] [All Lists]