No problem, I was being "more generic" in my comparison to Collins gear... i.e.
heavier duty parts, similar looking gear, similar paint scheme, etc.
Tim
--- On Sat, 6/9/12, Carl <km1h@jeremy.mv.com> wrote:
From: Carl <km1h@jeremy.mv.com>
Subject: Re: [Amps] Hunter 2000c
To: "Tim Kass" <k8wbl@yahoo.com>, "Charles Hedrick" <cchedrick@gmail.com>,
amps@contesting.com
Date: Saturday, June 9, 2012, 1:39 PM
Well, Im certainly not talking about a paint job since this is an amp forum
after all. And since Im very familiar with Collins gear and all brands of amps
I
was referring to the technical features.
Carl
KM1H
----- Original Message -----
From:
Tim Kass
To: Charles Hedrick ; amps@contesting.com ; Carl
Sent: Saturday, June 09, 2012 10:03
AM
Subject: Re: [Amps] Hunter 2000c
I have the 2000C unit. and Carl I have to disagree with you
about the Collins influence. Ted Hunter worked for Collins and
located his company just across the city from Collins.. And my amp, has
nearly the same color scheme...maybe different circuitry, that may be
the difference, dont know about that. :)
Tim
--- On Sat, 6/9/12, Carl <km1h@jeremy.mv.com>
wrote:
From:
Carl <km1h@jeremy.mv.com>
Subject:
Re: [Amps] Hunter 2000c
To: "Tim Kass" <k8wbl@yahoo.com>, "Charles
Hedrick" <cchedrick@gmail.com>, amps@contesting.com
Date:
Saturday, June 9, 2012, 8:38 AM
The Hunter 2000A and B were the 572 amps.
The C used a pair of 3-400Z's and was a very well designed and
rugged kit with quality components and on the market before the
SB-220. There was no Collins influence apparent.
While living in IL I operated at a
contest station that had a pair of the B models that held up well
when
not overdriven.
Carl
KM1H
----- Original Message -----
From: Tim
Kass
To: Charles Hedrick ; amps@contesting.com ; Carl
Sent: Friday, June 08, 2012
10:37 PM
Subject: Re: [Amps] Hunter
2000c
It is a simple amp, doubt that both filaments
would go out at the same time..the transformer has all the
windings on it, HV, filament, bias, so hope its not your
transformer.. had 2 of these in the past, still have one, my
primary amp, wonderful amp, built tough, similar to Collins
since the designer was an engineer at Collins before he
started Hunter Electronics..
73, Tim K8WBL
---
On Fri, 6/8/12, Carl <km1h@jeremy.mv.com>
wrote:
From:
Carl <km1h@jeremy.mv.com>
Subject:
Re: [Amps] Hunter 2000c
To: "Charles Hedrick"
<cchedrick@gmail.com>, amps@contesting.com
Date:
Friday, June 8, 2012, 7:39 PM
Start with the manual and
follow the circuit, its a good but very basic
amp.
Carl
KM1H
----- Original Message
-----
From: "Charles Hedrick" <cchedrick@gmail.com>
To: <amps@contesting.com>
Sent: Friday,
June 08, 2012 6:03 PM
Subject: [Amps] Hunter
2000c
> Hi all,
> We'll it was fine the
day before yesterday, but last night I turned it on
>
relays closed on xmit and no output. I looked and
found the filaments
> were
> not glowing so
suspect that circuit has an issue. I
haven't put the
> beast
> on the bench yet, but
has anyone experienced such an occurrence that can
>
advise a starting place rather than a full circuit
chase?
> Thanks
> WA4JKW
> Cam
>
_______________________________________________
> Amps
mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
-----
> No virus found in this message.
>
Checked by AVG - www.avg.com
> Version: 10.0.1424 /
Virus Database: 2433/5056 - Release Date: 06/08/12
>
_______________________________________________
Amps
mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
No virus found in this
message.
Checked by AVG - www.avg.com
Version: 10.0.1424 /
Virus Database: 2433/5056 - Release Date:
06/08/12
No virus found in this
message.
Checked by AVG - www.avg.com
Version: 10.0.1424 / Virus
Database: 2433/5058 - Release Date: 06/09/12
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|