Interesting. We're using the same hose, in 2 inch diameter, for the plate
cooling hoses on the 200 MHz QRO amplifier at work. It works very well with
high voltage, but I had no RF fields near it.
73
John
K5PRO
> Message: 2
> Date: Wed, 18 Apr 2012 17:12:23 -0400 (EDT)
> From: kf8od@aol.com
> Subject: [Amps] homebrew SK-2216 chimney
> To: amps@contesting.com
> Check out www.siliconehose.com. I found a 4 ply silicone hose with an ins>
> ide diameter of 3.380". Perfect for a 8877 chimney. I ordered a piece and>
> it works great. I put 10kv on it with no leakage current. Look at the li> nk
> for silicone straight hose. For $2.22 you can have a chimney.
>
> 73, Mike
> KF8OD
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|