Besides possibly blowing the switch? Not much.
It will have the same messed up Q that takes out the 15M contacts on several
amps when trying to run full bore on 17.
What sort of switch will you be using?
Carl
KM1H
----- Original Message -----
From: "David Feldman" <wb0gaz@yahoo.com>
To: <amps@contesting.com>
Sent: Wednesday, March 28, 2012 9:32 AM
Subject: [Amps] Sharing 15 and 10M on a single band switch position?
>
> My emerging project amp (a reconstituted Alpha 76A that is missing it's
> tank circuit) would normally require a 6-position band switch, but the
> switches I have (one and a spare) are 5-position. I'm thinking of
> designing the tank circuit to share 15 and 10M on one switch position, by
> having the PI network designed for around 24 MHz, on the theory I could
> use it on 21 and 28 MHz. I don't plan operate 24 MHz itself with the amp.
> Losing a bit of efficiency on 21 or 28 MHz isn't a concern. Anything else
> I should be concerned with?
>
> Thanks,
>
> 73 Dave WB0GAZ wb0gaz@yahoo.com
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2113/4899 - Release Date: 03/28/12
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|