Amps
[Top] [All Lists]

Re: [Amps] Source for plate xfrmer

To: amps@contesting.com
Subject: Re: [Amps] Source for plate xfrmer
From: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Reply-to: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Date: Tue, 14 Feb 2012 11:38:08 +0000
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Rob Atkinson wrote:
>In your long description you said nothing about the filter caps in use. 
>Please describe them.  Ideally I would want one or more oil caps giving 
>around 50 uF with 6 KVWDC
>

Good regulation requires two things: low transformer winding resistances 
*and* sufficient capacitance. If the winding resistances are much too 
high (which seems to be the case with Steve's transformer) then even 
large amounts of capacitance can only have a marginal effect.

This has always been apparent in the old paper charts, and software like 
PSU Designer makes it even clearer.



-- 

73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>