Amps
[Top] [All Lists]

[Amps] Clear Coat on Pi-Net Coil

To: <amps@contesting.com>
Subject: [Amps] Clear Coat on Pi-Net Coil
From: "Wayne Rogers" <n1wr@chesapeake.net>
Date: Sat, 11 Feb 2012 11:55:34 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Still working on my 4-1000 linear.  I have the pi-net coil wound with #10 
enameled wire on a 3.5" diameter ceramic form.  Right now I have the wire 
separated (between turns) with a .1" nylon line, but I want to remove the 
nylon line and fix the wires on the form.  In the old days we used varnish 
for this.  Question - what's the best approach now-A-days?  I have Krylon 
clear spray - will that work?

Thanks all for the good advice offered on this reflector.  It has bee na 
great help to me.

Wayne N1WR 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>