I finally got around to calculating the impedance of the Johnson design 6dB
transmitting attenuators that I have been making for use with grid-driven
amplifiers, etc. The impedance calculates out right at 350 ohms! No wonder
that they won't work with anything that has a fixed 50 ohm output!
Therefore, I have completely redesigned the attenuators to work with 50 ohm
impedance. I can still make them for 350 ohm impedance if someone really wants
one. The new attenuators will be available in either 6 dB or 10 dB versions
for 50 ohms and 6 dB for the 350 ohm versions.
The original Johnson design used a light bulb in addition to resistors for the
"high power" (100 watt) version. The new design attenuators use only resistors
and have 150 watts of dissipation in the resistors. Also, a heavy duty heat
sink has been added. Although the resistors are rated at 150 watts total, I
still suggest running no more than around 100 watts, especially on AM. Of
course, I definitely rate things conservatively.
Two versions are available, one with a bypass switch and one without.
The price for all of the attenuators is more than the old "low power" version
and are less than the "high power" versions. Just about midway between the two.
The original Johnson design had a definite input side and output side. These
new attenuators are symmetrical. That is, either jack can be used for input or
output.
These attenuators can be used for other things which require a reduction in
transmit power as well as for use with grid-driven amplifiers.
Details at
http://k9sth.com/uploads/Transmitting_Attenuators-1.pdf
Glen, K9STH
Website: http://k9sth.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|