Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] PA choke design

from [Alf Pousar] [Permanent Link][Original]
To: <Amps@contesting.com>
Subject: [Amps] PA choke design
From: "Alf Pousar" <alf.pousar@surffi.net>
Date: Wed, 29 Jun 2011 22:40:05 +0300
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
Hi,

if you coil 312 turns of wire, diameter 25,4 mm (1") and the length 51mm (2") 
the you have a 1mH inductance.

73

Alf  OH2QM
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] DIODE PIV Confusion, Robert Dorchuck
Next by Date:  Re: [Amps] DIODE PIV Confusion, Bill Fuqua
Previous by Thread:  Re: [Amps] PA choke design, Colin Lamb
Next by Thread:  [Amps] K5PRO is OK from the fire at Los Alamos, John Lyles
Indexes:  [Date] [Thread] [Top] [All Lists]