I am in dire need to replace the T/R relay in my Swan Mark VIB. It is a
3PDT, 12 VDC open frame relay rated at 10 Amps. Does anyone know of a
suitable replacement for this relay? I assume it is the same device used in
the Mark II amp. So far anything I have found is either the wrong voltage or
does not meet the physical size requirements. My alternative is rewiring the
input/output to bypass the dead device and outboard the T/R function.and use
a smaller relay to take care of the bias / grid-grounding function. I rather
not do that if I can help it.
Any help would be most appreciated!
Glenn, WA4GP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|