The end of the shaft sizes are 1/4" and 3/8" . The cap itself has 1/4-28
threads (1/4" 28 threads per inch). Most of the "nose cones" are the same
size.
Sometimes the 3/8" shaft end is just an adapter installed onto/over the top
the 1/4" end shaft.
Hope this helps.
73
Jim W7RY
--------------------------------------------------
From: "Ronald Brown" <rg52brown@yahoo.com>
Sent: Monday, May 02, 2011 10:28 AM
To: <amps@contesting.com>
Subject: [Amps] Jennings UCS puller interchangeability ?
> Anyone know if Jennings UCS type vacuum variable pullers for same neck
> size interchange ? Some come with 1/4" shaft, others with 5/8" shaft for
> same value capacitor. Is the threaded portion different size as well or
> can I swap pullers? - thanks - Ron K0IDX
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1321 / Virus Database: 1500/3611 - Release Date: 05/02/11
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|