Amps
[Top] [All Lists]

Re: [Amps] Homebrew is back..

To: "Sam Carpenter" <sam@owenscommunication.com>, "'WA3GIN'" <wa3gin@comcast.net>, "'Jim Thomson'" <jim.thom@telus.net>, <amps@contesting.com>
Subject: Re: [Amps] Homebrew is back..
From: "Carl" <km1h@jeremy.mv.com>
Date: Tue, 29 Mar 2011 12:33:23 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Hurry up and join in, there are more getting on by the day. Even a rice box 
or 60's controlled carrier TX into a linear does a good job when adjusted 
properly. On 10 to 17M even barefoot gets thru when conditions cooperate.

SSB is only good for contesting and adding a new one to Phone DXCC (-;

Carl
KM1H


----- Original Message ----- 
From: "Sam Carpenter" <sam@owenscommunication.com>
To: "'WA3GIN'" <wa3gin@comcast.net>; "'Carl'" <km1h@jeremy.mv.com>; "'Jim 
Thomson'" <jim.thom@telus.net>; <amps@contesting.com>
Sent: Tuesday, March 29, 2011 10:50 AM
Subject: RE: [Amps] Homebrew is back..


> Dang-it guys. Just when I was starting to be satisfied with SSB you had to
> go and make me think about nice, big, plate modulated AM audio again. That
> is going to cost me. It takes me back to many winter nights in a very warm
> room listening to such nice audio and wonderful smell of transmitter.
>
> Sam, N9FUT
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of WA3GIN
> Sent: Tuesday, March 29, 2011 9:49 AM
> To: Carl; Jim Thomson; amps@contesting.com
> Subject: Re: [Amps] Homebrew is back..
>
> Yeah,
>
> I've got a one owner Gates 1Kw AM xmitter which I have to tune up for 160m
> It is full of 833s. But I got a free pair of spares so I'll live with them
> ;-)
>
> wa3gin
>
> ----- Original Message ----- 
> From: "Carl" <km1h@jeremy.mv.com>
> To: "WA3GIN" <wa3gin@comcast.net>; "Jim Thomson" <jim.thom@telus.net>;
> <amps@contesting.com>
> Sent: Tuesday, March 29, 2011 9:22 AM
> Subject: Re: [Amps] Homebrew is back..
>
>
>> Im building up my second modulator with a pair, just picked up BC-1k mod
>> iron and reactor. The RF side will be 6C21's. I dont care for 833A's 
>> which
>
>> were what Gates used for both.
>>
>> Carl
>> KM1H
>>
>> ----- Original Message ----- 
>> From: "WA3GIN" <wa3gin@comcast.net>
>> To: "Jim Thomson" <jim.thom@telus.net>; <amps@contesting.com>
>> Sent: Tuesday, March 29, 2011 8:35 AM
>> Subject: Re: [Amps] Homebrew is back..
>>
>>
>>> What a biased bunch... no one mentioned the 304TL's  ;-)
>>> ----- Original Message ----- 
>>> From: "Jim Thomson" <jim.thom@telus.net>
>>> To: <amps@contesting.com>
>>> Sent: Tuesday, March 29, 2011 7:17 AM
>>> Subject: [Amps] Homebrew is back..
>>>
>>
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>