Re: [Amps] Adhesives

[Ron Youvan <ka4inm@tampabay.rr.com>]

Roger wrote:

> On 1/8/2011 8:49 AM, Mike Krzystyniak wrote:
>>      I have a DTR-2000 amp from Dentron.   The metalized label on the back 
>> has lifted about half way off starting from one of the corners.  It seems 
>> like the lifted part of the label to have lost its stickeynesss.  I want to 
>> reattach the label but due to the springy quality of the material I question 
>> which type of adhesive to apply.  Any suggestions?
> Due to the irregular shape I use contact cement sparingly and by the
> directions.

   I would attempt to carefully remove the label completely, clean the back of 
the label and where 
it goes, I would scrub the parking spot with a "scotch bright" (pot scrubber, 
mask around it with 
painters tape) and use the "contact cement" as Roger mentioned.  If all of the 
glue has not failed I 
would glue the lose portion back.
-- 
    Ron KA4INM - I'm proud to be Chuck's pop!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps