I had a look at the parameters of both the GI39b and GS35b and altho close I
think I will stick with the GS version , I dont want to introduce another
variable into the design , there is ALOT of documentation on the original tube
and applications and not so much on the later version , the 35B is still
readily available and seems to me to be a safer way to go until there is more
documented projects using the GI39.....AND the cooler for the tube I lost was
dinged up a bit in the fall , it was on a shelf above my workbench when it got
hit with a basketball and fell 6ft to the concrete floor haha I should have got
the kid a Nerf rocket or something more suitable to indoor play :)
......................................................................................................
73 VE3DV , Dave
> Date: Wed, 29 Dec 2010 15:52:25 -0800
> From: gzook@yahoo.com
> To: n4zr@contesting.com; amps@contesting.com; mikea@mikea.ath.cx
> Subject: Re: [Amps] GS35B Needed
>
> The GI-39B shows to be the replacement for the GS-35B.
>
> http://qro-parts.com/product_info.php?products_id=76
>
> Glen, K9STH
>
> Website: http://k9sth.com
>
>
> --- On Wed, 12/29/10, mikea <mikea@mikea.ath.cx> wrote:
>
> Phone-call time?
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|