I think that is correct Dennis. With heater type tubes, the gettering
is done with just the heater running. With filament type tubes, you
gotta run the grunt to getter them.
73, Alek.
At 06:29 AM 20/12/2010, Dennis Goebel wrote:
>Thanks Alek
>You mean you don't have to draw any anode current to condition it?
>
>There must be some getter material on the cathode structure.
>
>Dennis
>
>
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
http://www.qrz.com/db/vk6apk
http://www.qrz.com/db/vk6ap
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|