Amps
[Top] [All Lists]

Re: [Amps] Fan for SB220

To: amps@contesting.com
Subject: Re: [Amps] Fan for SB220
From: donroden@hiwaay.net
Date: Sun, 19 Dec 2010 01:45:41 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com>
The Britts were very particular about their afternoon tea.
A highly polished ( on the outside ) tea pot retained the internal  
water/tea heat longer than a tea pot that was dull or painted black.

Don W4DNR



Quoting Carl <km1h@jeremy.mv.com>:

> Well, polished and finned aluminum heads on a flathead Ford V-8 both look
> nice and work well and Ive had them on several of my rides over the past 50+
> years. With a large overbore, increaser compression, and a decent cam those
> engines tend to run hot.
>
> I'll defer to the pros at the amp companies and the military who use nice
> shiny aluminum on the inside.
>
> Carl
> KM1H

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>