[Amps] TERMINATING Coax relay

["Allan Greening" <vk3pa@vk3pa.com>]

When using a dual coax relay is it better to terminate the unused port into
a short or into a 50 ohm load??
I am using a dual 4 port coax relay to feed 2 radios into a common amp, so
should  I terminate into short to gnd or a 50 ohm load? 1 radio goes to the
amp es other is shorted to gnd es the other way round when relays are
keyed!!
73 es Dxis vk3pa
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps