it keeps stray rf voltage out.
> From: k5jwkgary@gmail.com
> To: amps@contesting.com
> Date: Sun, 12 Dec 2010 21:17:47 -0600
> Subject: [Amps] Henry 3KD Classic Question
>
> I just repaired one of these amps and I have a question. The input circuit
> had a mod that was penciled in on the schematic. There were 8ea .01 disc
> caps divided by 2 and soldered between each of the cathode leads and the
> input from the band switch. The note on the schematic showed them soldered
> from the cathode leads to ground. I removed the caps initially for repair.
> The amp seems to be working fine. Should I put the caps back in and if so,
> do they go between the cathodes and ground or the cathodes and the input?
>
>
>
> I'd appreciate your thoughts.
>
>
>
> Vr,
>
>
>
> Gary H. Harmon, Jr. - K5JWK
>
> 6003 Archwood
>
> San Antonio, TX 78239-1504
>
> 210.657.1549h / 210.884.6926c
>
>
>
> "Retirement means every day is a Saturday except Sunday"
>
>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|