For those that don't get it, a few did, once you feel the torque drop the bolt
has already reached its limit and is broken.
Once you see the SWR go up it is most likely too late.
73
Bill wa4lav
________________________________________
From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf Of
Jim Dawson [jdawson@jasystems.com]
Sent: Tuesday, December 07, 2010 4:53 PM
To: amps@contesting.com
Subject: Re: [Amps] Derating Dry Loads
----- Original Message -----
From: Bill Fuqua
To: amps@contesting.com
Sent: Tuesday, December 07, 2010 3:40 PM
Subject: Re: [Amps] Derating Dry Loads
Well crap, that explains a lot, it is just "before" they snap!
... Just like tightening head bolts on a V8. You torque the bolts until
just before you fill them give and they snap.
73
Bill wa4lav
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|