Martin Sole wrote:
> Wonder if someone here might be able to help with some info on the W3NQN
> bandpass filters. Our club station has some we are using between the rig and
> amplifier (phew, worked the amp reference in nicely there.) Somebody put the
> 20 metre one on the amp output where 200 watt filters don't live long. So
> one toasted filter. I thought this would be no problem. I have the 2 QST
> articles by W3NQN that describes these filters. BTW these are the ones sold
> by Array Solutions. Popping the cover shows they don't match the circuit of
> the QST article though so now I'm confused.
If the coils aren't melted the only damage that I would expect is the
high Voltage damaging some of the capacitors so I would replace all of
them and test the results, then I would test (capacity and breakdown
Voltage) those taken out and save the good ones for the next time it
happens. Get a Dymo or P-Touch and mark them all [200 Watts Max!].
--
Ron KA4INM - nothin's quite as sure as change
from "look through my window" - The Mamas & The Papas
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|