[Amps] older 3k

[Dennis OConnor <ad4hk2004@yahoo.com>]

Based on minimal information and assuming you have checked the fuses, my first 
suspicion is you have  3-500 tubes and the solder has melted off the filament 
pins... Very common with Henry 3K (I've been there a couple of times)
If so, you need to beef up the air flow to the bottom of the tube after 
resoldering the pins...

denny / k8do




      
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps