Hi Lee,
I don't use cardboard, but I do make a drawing on an 8" x 10" sheet of paper
showing all the parts, socket orientation, etc., of my HB creations...
If you err at the drawing board, t'is far & away better then, than to
discover a mistake during the drilling/bending process!
~73~ de Eddy VE3CUI - VE3XZ
******************************************
----- Original Message -----
From: "Lee Buller" <k0wa@swbell.net>
To: <amps@contesting.com>
Sent: Wednesday, November 17, 2010 12:41 PM
Subject: [Amps] Building a Mock Up
>
> How many of you amp builders make a mock up of the chassis and layout in
> "cardboard" before you start cutting, bending and drilling metal?
>
> Lee - K0WA
>
>
> In our day and age it seems that Common Sense is in short supply. If you
don't
> have any Common Sense - get some Common Sense and use it. If you can't
find any
> Common Sense, ask for help from somebody who has some Common Sense. Is
Common
> Sense divine?
>
> Common Sense is the image of the Creator expressing revealed truth in my
mind.
> - J. Wolf
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|