Allan
I asked the same question 3 month ago on this same reflector:
First response
Second response
More info
I am running my tubes at 200 milliamps per tube which is about 20% -25% of my
Cathode current, at about 3400 volts. With 2 tubes, I used a figure of 1700
ohms for my Plate Impedence load.
I hope the links work and, I hope this helps out.
Mel
"Knock-Out-Zero-Won"
.
--- On Fri, 11/12/10, Allan Greening <vk3pa@vk3pa.com> wrote:
From: Allan Greening <vk3pa@vk3pa.com>
Subject: [Amps] GS35b
To: amps@contesting.com
Date: Friday, November 12, 2010, 10:09 PM
Wot value should the bias be set at for when ht is 3kv..
1 CW
2 SSB..
TU 73 es Dxis vk3pa
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|