Re: ALC control with Yaesu FT- 897D and Ameritron ALS-600
Jim:
Thanks for the advice on the ALC. The manual made me think that it was the
most important way of regulating power with all modes except for CW. I have
taken your advice and cut the installation down to a single cable to pull the
relay down to ground potential. In the past I have rarely ever used any type
of compression for worry of distortion (as you pointed out).
The reason that I chose a solid-state amplifier, as opposed to using my Dentron
GLA 1000C, was to make things as simple as possible. Getting into the ALC
issue was quickly becoming counterproductive.
Dick Zseltvay, KC4COP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|