Im using the stock value 80uF in a NCL-2000 and the output is very clean.
Carl
KM1H
----- Original Message -----
From: <mikflathead@aol.com>
To: <Amps@contesting.com>
Sent: Sunday, November 07, 2010 9:26 AM
Subject: [Amps] filter caps
>
>
>
> I am building a power supply for an old 432 mhz. RIW amp. I am building a
> separate supply for the screen as apposed to running them off the plate
> supply with dropping resistors. I plan on using a tetrode board. What
> would be an appropriate filter capacitance for my supply? Thanks Mike
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|