ORIGINAL MESSAGE:
On Thu, 19 Aug 2010 11:06:29 -0700 (PDT), Mel
<itz_da_police@yahoo.com> wrote:
>
>The are knowledgible people who would recomment that you test the tube with a
>HV Megohmeter but unless you are planning on running 2-3 times the suggested
>level of B+ volts I do not believe this is necessary.
REPLY:
In normal operation the tube will experience anode voltage swings from
approximately ground to approximately twice B+.
The Megohmmeter sounds like a good idea to me.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|