Well all the banter the last couple dys has triggered my motivation and I
started digging everything out of storage , upon close exam of the Plate xfrmer
I discovered I was wrong with the voltages , it isnt 1740 volts it is
1740/0/1740 and 1250/0/1250 , so the GI7B project has turned into a gs35b so I
can use the full voltage of the 1250/0/1250 taps I chose the gs35b because of
cost , I have a guy here wanting my gi7b tubes and it will cover 2/3 of the
price of the bigger gs35b
I have the plate Xfrmer idling no load with primary power at 100% to dry things
out in case it has picked up any moisture sitting in the basement. I have
verified the voltage with a variac on the primary and fed low voltage to check
the secondary , all is as it should be
Just wanted to thank the members for their enthusiasm in this hobby , it has me
REALLY looking forward to getting things on the go, this will be a big step up
from 400 watt sweep tube amps for me LOL
......................................................................................................
Thanks and
73 Dave VE3DV / VE3BNF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|