I don't want to be branded as a cynic (OK, OK, as any MORE of a cynic...), but
let's just say that it's the job of the marketing department to encourage
people to think that they need a product that actually they don't. Or perhaps
that they need to buy a product to solve a problem that's not actually there.
There's one born every day and good luck to 73CNC, I'm sure that many 11 metre
3-500Z amplifiers will be modified with their shiny new plate caps.
Dave G0OIL
--- On Fri, 2/7/10, Jim W7RY <jimw7ry@gmail.com> wrote:
From: Jim W7RY <jimw7ry@gmail.com>
Subject: Re: [Amps] New High Efficiency 3-500Z plate caps
To: "Randall, Randy" <Randy.Randall@healthall.com>
Cc: "amps@contesting.com" <amps@contesting.com>
Date: Friday, 2 July, 2010, 4:06
You'll also notice the crayon is going DIRECTLY onto the anode "pin" the
tube on the right. And on the TOP of the "new fangled" plate cap on the
right.
Not a very fair test. I would like to see the test repeated with a GENUINE
HR-6 and the "new fangled" plate cap.
73
Jim W7RY
On Thu, Jul 1, 2010 at 11:54 AM, Randall, Randy <Randy.Randall@healthall.com
> wrote:
> I have to agree with Carl as to the price. $45.00 ea or 2 for $85.00! If
> you have a situation that you are damaging the seal due to poor cooling,
> they could be worth the price. Otherwise the usual $5.00 units will be on
> my tubes.
>
>
> Randy AB9GO
>
>
> "In theory, theory and practice are the same thing. In practice they're
> not."
>
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Carl
> Sent: Thursday, July 01, 2010 9:02 AM
> To: Jim Garland; amps@contesting.com
> Subject: Re: [Amps] New High Efficiency 3-500Z plate caps
>
> Talk about pricey!
>
> How do those perform when using transverse cooling? Due to the large
> surface
> area Id think that the graphite anodes would benefit the most.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "Jim Garland" <4cx250b@muohio.edu>
> To: <amps@contesting.com>
> Sent: Thursday, July 01, 2010 8:25 AM
> Subject: [Amps] New High Efficiency 3-500Z plate caps
>
>
> > Check out http://www.youtube.com/watch?v=EoVCGFPvOuk
> > <http://www.youtube.com/watch?v=EoVCGFPvOuk&hd=1> &hd=1 for a neat video
> > showcasing the new 3-500Z plate caps by Mike Freeman NT8O and his brother
> > at
> > www.73CNC.com <http://www.73cnc.com/>
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> Confidentiality Notice: This e-mail message, including any attachments, is
> for the sole use of the intended recipient(s) and may contain confidential
> and privileged information. Any unauthorized review, use, disclosure or
> distribution is prohibited. If you are not the intended recipient, please
> contact the sender by reply e-mail and destroy all copies of the original
> message.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|