Amps
[Top] [All Lists]

[Amps] 48VDC power supply mating connectors

To: <amps@contesting.com>
Subject: [Amps] 48VDC power supply mating connectors
From: "Dick Hanson" <dick@dkhanson.com>
Date: Mon, 5 Apr 2010 16:17:26 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Howdy...
For those of you using or contemplating the surplus hp or emerson 48VDC at
57 amp power supplies, here is a source, finally, for the mating connectors.
These supplies, assuming you NEED one, are perhaps the best deal on the
planet at the moment for those of us still building amps.
But, without the mating connectors, the input and output connections were
sort of problematic.
Unfortunately, you have to buy the whole enclosure to get the connectors,
but it gives you six complete sets of connectors, so perhaps a group thing.
Good luck.
73
Dick, K5AND

Source:

Bruce Veldman
C-Tech, Inc.
9675 W 76th St, Suite 180
Eden Prairie, MN  55344
PH: 952-249-6834
Fax: 952-249-6859
IM: brucectch
bruce@c-techonline.com
www.c-techonline.com

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] 48VDC power supply mating connectors, Dick Hanson <=