Amps
[Top] [All Lists]

Re: [Amps] Amp Supply LK550

To: "Sam Carpenter" <sam@owenscommunication.com>, <amps@contesting.com>
Subject: Re: [Amps] Amp Supply LK550
From: "Carl" <km1h@jeremy.mv.com>
Date: Tue, 16 Mar 2010 11:26:31 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
It works more efficient with 2 tubes if you are satisfied with 1500-1600W 
and that usually requires tweaking the input.
With 3 tubes it tends to be a bit unstable on 10M due to incomplete 
neutralization.

The usual padder and blocking cap caveats hold with all their amps except 
the LK-450 and LK-750.

Carl
KM1H


----- Original Message ----- 
From: "Sam Carpenter" <sam@owenscommunication.com>
To: <amps@contesting.com>
Sent: Tuesday, March 16, 2010 10:47 AM
Subject: [Amps] Amp Supply LK550


> Anyone out there have one of these using RFP tubes? What are you seeing 
> for
> output on 75 and 20 meters? Are these holding up through the years? I have
> heard that there are some issues with cheap caps in the RF section and 
> some
> issues with 160m.
>
>
>
> Sam Carpenter,  N9FUT
>
> Owens Communications, Inc.
>
> 1815 21st Street
>
> Columbus, IN 47201
>
> Office - 812-376-9652
>
> Cell -812-325-5735
>
> Fax - 812-376-9729
>
> www. owenscommunication.com
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>