I have a pair of Eimac 8875's that are surplus. I purchased them from
W2CQM/3 a few years ago based on his guarantee that they produced 1200w
output with 2600vdc plate voltage and 100w of drive on his test bench.
I have never installed or tested them. If anyone is interested they can
contact me directly.
Doug/VA5DX
I'll run the race and I will never be the same again.
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
On Behalf Of Jim Thomson
Sent: March 2, 2010 10:48 PM
To: amps@contesting.com
Subject: [Amps] MLA-2500 retrofit.
I have a buddy with TWO MLA-2500's..... and both now with flat/bad
tubes.
I believe one of them has a tuned input, and the 2nd one does not.
Is the tube really unavailable ? If so, what are his options ?
What other tube[s] can be retrofitted ?
What is the easiest retrofit available ? Does anybody do these
retrofits as a sideline ??
later... Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|