Amps
[Top] [All Lists]

Re: [Amps] Fw: WD-40 is not....

To: "'Phil Clements'" <philc@texascellnet.com>, "'Jim Dawson'" <jdawson@jasystems.com>, "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] Fw: WD-40 is not....
From: "Randall, Randy" <Randy.Randall@healthall.com>
Date: Tue, 2 Mar 2010 09:39:22 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Most if not all of the units available today are multi fuel.  The units I am 
‎most familiar with are the units produced by DESA in Kentucky. ‎

Randy AB9GO


-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On 
Behalf Of Phil Clements
Sent: Monday, March 01, 2010 11:11 PM
To: 'Jim Dawson'; amps@contesting.com
Subject: Re: [Amps] Fw: WD-40 is not....




> It's not rare around here but it sure is expensive. I have run my torpedo
heater
> on diesel
> fuel with no ill affects and it is almost affordable. I know several guys
that
> have run diesel
> for years.
>
> Jim - K9DD

I switched to diesel two winters ago. The heater did not make the entire
winter;
massive failure. I will never know for sure if the fuel change contributed
to this.
The electric igniter element burned into two pieces, breaking the circuit. I
apologize for the off-topic reply, but I want to know that if I buy another
unit, will I be okay with diesel!?!?

Phil, K5PC



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

Confidentiality Notice: This e-mail message, including any attachments, is for 
the sole use of the intended recipient(s) and may contain confidential and 
privileged information.  Any unauthorized review, use, disclosure or 
distribution is prohibited. If you are not the intended recipient, please 
contact the sender by reply e-mail and destroy all copies of the original 
message.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>